Deep Groove ball bearings, widely used radial bearings, are simple in design, non-separable, and capable of operating at high speed. They require little attention or maintenance in service.
Inner and outer rings of single row deep groove ball bearings have deep groove raceways. The bearings are mainly used to carry radial load and a part of axial load in two directions. This kind of bearings can carry more axial load as the increase of radial clearance. Thus, it can take place of high speed angular contact ball bearings.
LEGEND provides deep groove ball bearings with various types and structures. Besides open type bearings, bearings with shield or seal at one side, shields or seals at both sides can also be provided for customers. The sealed bearings are filled with grease and are unnecessary to wash before mounting. Bearings with seals will provide the most reliable operation at ambient temperature between ¨C30¡æ and +100¡æ. Deep groove ball bearings with a snap ring groove can be provided and should be taken into account when the mounting position is limited because they can be retained in the housing by a snap ring. Combined design of shields, seals and snap ring groove mentioned above can be provided according to different applications.
To meet customers¡¯ special needs of bearing vibration levels, LEGEND can provide low vibration (or low noise) deep groove ball bearings.
LEGEND deep groove ball bearings are supplied with pressed steel cages, machined solid cages or glass fiber reinforced polyimide and other engineering plastic cages.
Type: single row, double row, sealed type, shielded type, snap groove type
Cage: pressed cage, solid cage, nylon cage